|
CSA 101/I.S.2/A440- 05 |
Standard/Specification for windows, doors, and unit skylights-First Edition; AAMA/WDMA |
|
CSA A123.1-05/A123.5- 05 |
Asphalt Shingles Made from Organic Felt and Surfaced with Mineral Granules/ Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules-Second Edition |
|
CSA A123.17- 05 |
Asphalt glass felt used in roofing and waterproofing-Second Edition |
|
CSA A123.2- 03 |
Asphalt-coated roofing sheets |
|
CSA A123.3-98- CAN/CSA |
Asphalt Saturated Organic Roofing Felt-Third Edition; |
|
CSA A123.4- 04 |
Asphalt for constructing built-up roof coverings and waterproofing systems-Third Edition |
|
CSA A123.51-M85- CAN3 |
Asphalt Shingle Application on Roof Slopes 1:3 and Steeper-General Instruction No 1-2 |
|
CSA A123.52-M85- CAN3 |
Asphalt Shingle Application on Roof Slopes 1:6 to Less Than 1:3- General Instruction No 1-2 |
|
CSA A14-00- CAN/CSA |
Concrete Poles-Seventh Edition; General Instruction No 1; Update No 2 |
|
CSA A220 SERIES-M91- CAN/CSA |
Concrete Roof Tiles-First Edition; General Instruction No 1- 2 |
|
CSA A23.1-04/A23.2-04- CAN/CSA |
Concrete Materials and Methods of Concrete Construction/ Methods of Test and Standard Practices for Concrete-Tenth Edition; Update No 1 |
|
CSA A23.3- 04 |
Design of concrete structures-Fifth edition; Update No.1 |
|
CSA A231.1- 99 |
Precast Concrete Paving Slabs-General Instruction No 1-2 |
|
CSA A231.2- 95 |
Precast Concrete Pavers-Second Edition; General Instruction No 1 |
|
CSA A257 SERIES- 03 |
Standards for Concrete Pipe and Manhole Sections-Fourth Edition; Update No 1 |
|
CSA A277-01- CAN/CSA |
Procedure for Certification of Factory-Built Houses-Fourth Edition; General Instruction No 1; Update No 2 |
|
CSA A283- 00 |
Qualification Code for Concrete Testing Laboratories-Third Edition; General Instruction No.1 |
|
CSA A3000 SERIES- 03 |
Cementitious Materials Compendium-Second Edition; Update No 1; Update No 2; Update No 3 |
|
CSA A324-M88- CAN/CSA |
Clay Flue Liners-First Edition; General Instruction No 1 |
|
CSA A344.1/A344.2- 05 |
User guide for steel storage racks/Standard for the design and construction of steel storage racks-First Edition |
|
CSA A369.1-M90- CAN/CSA |
Method of Test for Compressive Strength of Masonry Prisms- Second Edition; General Instruction No 1 |
|
CSA A438- 00 |
Concrete Construction for Housing and Small Buildings-Third Edition; General Instruction No 1; Update No 2 |
|
CSA A440.2/A440.3- 04 |
Energy Performance of Windows and Other Fenestration Systems/ User guide to CSA A440.2-04, Energy performance of windows and other fenestration systems- Update No 1 |
|
CSA A440.4- 98 |
Window and Door Installation-First Edition; General Instruction No 1 |
|
CSA A440-00/A440.1- 00-CAN/CSA |
Windows / User Selection Guide to CSA Standard A440-00- Fourth Edition; General Instruction No 1; Update No. 2 |
|
CSA A450.1-M86- CAN3 |
Ceramic Wall Tile Adhesives (Organic)-First Edition; General Instruction No 1 |
|
CSA A451.1-M86- CAN3 |
Polystyrene Insulation Adhesives-First Edition; General Instruction No 1 |
|
CSA A453- 95 |
Energy Performance Evaluation of Swinging Doors-General Instruction No 1 |
|
CSA A82.1-M87- CAN/CSA |
Burned Clay Brick (Solid Masonry Units Made from Clay or Shale)-Second Edition; General Instruction No 1 |
|
CSA A82.2-M78- CAN3 |
Methods of Sampling and Testing Brick |
|
CSA A82.8-M78- CAN3 |
Hollow Clay Brick-First Edition: General Instruction No. 1 |
|
CSA A864- 00 |
Guide to the Evaluation and Management of Concrete Structures Affected by Alkali-Aggregate Reaction-First Edition; General Instruction No.1 |
|
CSA A93-M82- CAN3 |
Natural Airflow Ventilators for Buildings-Third Edition; General Instruction No 1 |
|
CSA B111- 1974 |
Wire Nails, Spikes and Staples-General Instruction No 1 |
|
CSA B125.1- 05 |
Plumbing supply fittings-ASME A112.18.1 |
|
CSA B125.2- 05 |
Plumbing waste fittings-ASME A112.18.2-2005 |
|
CSA B125.3- 05 |
Plumbing fittings |
|
CSA B127.1- 1999 |
Asbestos Cement Drain, Waste, and Vent Pipe and Pipe Fittings-Third Edition; General Instruction No.1; Update No 2 |
|
CSA B1800- 02 |
Plastic Nonpressure Pipe Compendium-Update No. 1-4; Supplement 1:2005 |
|
CSA B196.3- M1983 |
PVC Underground Telecommunication Cable Ducting and Fittings- Second Edition; General Instruction No 1 |
|
CSA B242- 05 |
Groove- and shoulder-type mechanical pipe couplings |
|
CSA B272- 93 |
Prefabricated Self-Sealing Roof Vent Flashings-General Instruction No 1 |
|
CSA B356- 00 |
Water Pressure Reducing Valves for Domestic Water Supply Systems- Second Edition; General Instruction No. 1; Update No. 2; Update No. 3 |
|
CSA B45 SERIES- 02 |
Plumbing Fixtures-Fifth Edition; Update No 1-2; Supplement No. 1: 10/2004; Update No 3 |
|
CSA B45.10-01- CAN/CSA |
Hydromassage Bathtubs-First Edition; General Insruction No. 1; Update No. 2 |
|
CSA B602- 05 |
Mechanical Couplings for Drain, Waste, and Vent Pipe and Sewer Pipe- Fourth Edition |
|
CSA B64 SERIES-01- CAN/CSA |
Backflow Preventers and Vacuum Breakers-Fourth Edition; General Instruction No 1; Update No 2; Update No 3; Update No 4 |
|
CSA B64.10-01/B64.10.1- 01 |
Manual for the Selection and Installation of Backflow Prevention Devices/Manual for the Maintenance and Field Testing of Backflow Prevention Devices-Fourth Edition; General Instruction No. 1; Update No. 2; Supplement No. 1; Update No. 3 |
|
CSA B66- 05 |
Design, material, and manufacturing requirements for prefabricated septic tanks and sewage holding tanks |
|
CSA B70.1- 03 |
Frames and Covers for Maintenance Holes and Catchbasins-First Edition; Update No 2 |
|
CSA B70- 02 |
Cast Iron Soil Pipe, Fittings, and Means of Joining-Ninth Edition; Update No. 1; Update No. 2 |
|
CSA B79- 05 |
Floor drains, area drains, shower drains, and cleanouts in residential construction |
|
CSA DIR.004- 99 |
List of CSA Certified Plumbing Products |
|
CSA DIR.007- 1996 |
List of CSA Certified Precast Concrete Manufacturers |
|
CSA DIR.011- 1996 |
List of CSA Certified Concrete Testing Laboratories |
|
CSA E60974-5-03- CAN/CSA |
Arc welding equipment - Part 5: Wire feeders-First Edition |
|
CSA E60974-7-02- CAN/CSA |
Arc Welding Equipment - Part 7: Torches-First Edition; CEI/IEC 60974-7: 2000 |
|
CSA G162.1- M1977 |
Methods of Determining Mass of Coating on Zinc-Coated (Galvanized) Steel Wire |
|
CSA G164-M92- CAN/CSA |
Hot Dip Galvanizing of Irregularly Shaped Articles Metals and Metal Products-General Instruction No 1-2 |
|
CSA G189- 1966 |
Sprayed Metal Coatings for Atmospheric Corrosion Protection-General Instruction No 1 |
|
CSA G30.18-M92- CAN/CSA |
Billet-Steel Bars for Concrete Reinforcement Metals and Metal Products-General Instruction No 1-2 |
|
CSA G312.1-75- CAN3 |
Preferred Metric Dimensions for Flat Metal Products |
|
CSA G312.2-M76- CAN3 |
Preferred Metric Dimensions for Round, Square, Rectangular and Hexagonal Metal Products |
|
CSA G40.20-04/G40.21- 04 |
General requirements for rolled or welded structural quality steel/ Structural quality steel-Sixth Edition |
|
CSA G40.23-94- CAN/CSA |
Steel - Surface Finish of Hot-Rolled Plates and Wide Flats - Delivery Requirements-General Instruction No 1 |
|
CSA G401- 01 |
Corrugated Steel Pipe Products-Third Edition; General Instruction No 1 |
|
CSA M15078-03- CAN/CSA |
Machinery for forestry Log loaders Location and method of operation of two-lever operator controls-First Edition |
|
CSA O112 SERIES- M1977 |
CSA Standards for Wood Adhesives-First Edition |
|
CSA O112.9- 040 |
Evaluation of adhesives for structural wood products (exterior exposure)- First Edition |
|
CSA O115- M1982 |
Hardwood and Decorative Plywood-General Instruction No 1 |
|
CSA O116- 1969 |
Power and Communication Sawn Wood Crossarms-General Instruction No 1 |
|
CSA O118.1- 97 |
Western Red Cedars Shakes and Shingles-Fifth Edition; General Instruction No 1 |
|
CSA O118.2- 1981 |
Eastern White Cedar Shingles-General Instruction No 1 |
|
CSA O118.2- M1981 |
Eastern White Cedar Shingles-General Instruction No 1 |
|
CSA O118.3- 93 |
Northern Pine Tapersawn Shakes-General Instruction No 1; Update No. 2 |
|
CSA O121- M1978 |
Douglas Fir Plywood-General Instruction No 1; Erratum: September 1978; Amendment 1-3: August 1981 |
|
CSA O141- 05 |
Softwood Lumber |
|
CSA O15- 05 |
Wood Utility Poles and Reinforcing Stubs-Third Edition |
|
CSA O151- 04 |
Canadian Softwood Plywood-Third Edition |
|
CSA O153- M1980 |
Poplar Plywood-General Instruction No 1 |
|
CSA O302.1/O302.2- 00 |
Scaling Roundwood / Measurement of Woodchips, Tree Residues, and Byproducts-General Instruction No 1, Third Edition |
|
CSA O322- 02 |
Procedure for Certification of Pressure-Treated Wood Materials for Use in Preserved Wood Foundations-Second Edition |
|
CSA O325.0-92- CAN/CSA |
Construction Sheathing-Second Edition; General Instruction No 1 |
|
CSA O325.1-88- CAN/CSA |
Test Methods for Construction Sheathing-General Instruction No 1-2; Supplement 1: 1992 |
|
CSA O437 SERIES- 93 |
Standards on OSB and Waferboard-Second Edition; General Instruction No 1 |
|
CSA O452 SERIES- 94 |
Design Rated OSB-First Edition; General Instruction No 1 |
|
CSA O56- 1962 |
Round Timber Piles-Revision 1-2; July 1967 |
|
CSA O56-M79- CAN3 |
Round Wood Piles-First Edition; General Instruction No. 1 |
|
CSA O80 SERIES- 97 |
Wood Preservation-Ninth Edition; General Instruction No 1-4; Supplement 1:1999; Supplement 2:2005 |
|
CSA O86- 01 |
Engineering Design in Wood-Eighth Edition; Update No 1; Supplement 1- 2005; Reprinted June 2005 |
|
CSA PLUS 1132 |
Building Materials and Products-General Instruction No 1 |
|
CSA PLUS 1132- 96 |
BREEAM - CANADA; an Environmental Performance Assessment for Existing Office Buildings |
|
CSA PLUS 1163 |
Chain of Custody for Forest Products Originating from a Defined Forest Area Registered to CSA Standard CAN/CSA-Z809-First Edition |
|
CSA S136.1- 95 |
Commentary on CSA Standard S136-94, Cold Formed Steel Structural Members-General Instruction No 1 |
|
CSA S136- 01 |
North American Specification for the Design of Cold-Formed Steel Structural Members-Sixth Edition; Update No 1; Update No 2; Supplement 1: 2004 |
|
CSA S157-05/S157.1- 05 |
Strength design in aluminum/ Commentary on CSA S157-05, Strength design in aluminum-Fourth Edition |
|
CSA S16-01- CAN/CSA |
Limit States Design of Steel Structures-Sixth Edition; Reprinted 8/2005; Incorporates Updates 1&2, Supplement 1 |
|
CSA S269.1- 1975 |
Falsework for Construction Purposes-General Instruction No 1 |
|
CSA S269.2-M87- CAN/CSA |
Access Scaffolding for Construction Purposes-Second Edition; General Instruction No. 1 |
|
CSA S269.3-M92- CAN/CSA |
Concrete Formwork-First Edition; General Instruction No 1 |
|
CSA S304.1- 04 |
Design of masonry structures-Second Edition |
|
CSA S307- M1980 |
Load Test Procedure for Wood Roof Trusses for Houses and Small Buildings-Second Edition; General Instruction No 1-2 |
|
CSA S347- 99 |
Method of Test for Evaluation of Truss Plates Used in Lumber Joints-Third Edition; General Instruction No. 1 |
|
CSA S350- M1980 |
Code of Practice for Safety in Demolition of Structures-First Edition; General Instruction No. 1 |
|
CSA S367-M81- CAN3 |
Air-Supported Structures-First Edition; General Instruction No 1- 2 |
|
CSA S37- 01 |
Antennas, Towers, and Antenna-Supporting Structures-Sixth Edition; Update No 1 |
|
CSA S406-92- CAN/CSA |
Construction of Preserved Wood Foundations-General Instruction No 1; Second Edition |
|
CSA S413-94- CAN/CSA |
Parking Structures-Second Edition; General Instruction No 1- 2 |
|
CSA S448.1- 93 |
Repair of Reinforced Concrete in Buildings-General Instruction No 1- 2 |
|
CSA S471- 04 |
General requirements, design criteria, the environment, and loads-Third Edition; Update No 1 |
|
CSA S472- 04 |
Foundations-Third Edition; Update No 1 |
|
CSA S473- 04 |
Steel structures-Third Edition; Update No 1 |
|
CSA S474- 04 |
Concrete Structures-Update No 1 |
|
CSA S475- 03 |
Sea Operations-Third Edition; Update No 1 |
|
CSA S478- 95 |
Guideline on Durability in Buildings-General Instruction No 1; First Edition |
|
CSA S6.1- 00 |
Commentary on CSA Standard CAN/CSA-S6-00, Bridge Design Code |
|
CSA S6-00- CAN/CSA |
Canadian Highway Bridge Design Code-Ninth Edition; General Instruction No 1 |
|
CSA S806- 02 |
Design and Construction of Building Components with Fibre-Reinforced Polymers-First Edition; Update No 2-4 |
|
CSA S826 SERIES-01- CAN/CSA |
Ferry Boarding Facilities-General Instruction No. 1; First Edition |
|
CSA S832- 01 |
Guideline for Seismic Risk Reduction of Operational and Functional Components (OFCs) of Buildings-First Edition; Update No. 1 |
|
CSA W117.2-01- CAN/CSA |
Safety in Welding, Cutting, and Allied Processes-Fourth Edition; General Instruction No 1; Update No 2; Update No 3; Update No 4 |
|
CSA W178.1- 02 |
Certification of Welding Inspection Organizations-Fourth Edition |
|
CSA W178.2- 01 |
Certification of Welding Inspectors-Fourth Edition |
|
CSA W186- M1990 |
Welding of Reinforcing Bars in Reinforced Concrete Construction- General Instruction No 1 |
|
CSA W47.1- 03 |
Certification of Companies for Fusion Welding of Steel-Sixth Edition |
|
CSA W47.2- M1987 |
Certification of Companies for Fusion Welding of Aluminum-General Instruction No 1 |
|
CSA W48-01- CAN/CSA |
Filler Metals and Allied Materials for Metal Arc Welding-First Edition; General Instruction No 1; Supersedes the Previous W48 Series of Standards Comprising W48.1 to W48.6; Update No 2 |
|
CSA W55.3- 1965 |
Resistance Welding Qualification Code for Fabricators of Structural Members Used in Buildings |
|
CSA W59.2- M1991 |
Welded Aluminum Construction-General Instruction No 1; Replaces CSA S244-1969 |
|
CSA W59- 03 |
Welded Steel Construction (Metal Arc Welding)-Eighth Edition; Update No. 1 |
|
CSA W59- M1989 |
Steel Fixed Offshore Structures Welded Steel Construction (Metal Arc Welding)-General Instruction No 1; Supplement 1; 1989; General Instruction No 2 to Supplement 1; 1989 |
|
CSA Z240 MH SERIES- 92 |
Mobile Homes-Second Edition; General Instruction No 1-3; Update No 4 |
|
CSA Z240 RV SERIES- 99 |
Recreational Vehicles-Second Consolidated Edition |
|
CSA Z240.10.1- 94 |
Site Preparation, Foundation, and Anchorage of Mobile Homes-Second Edition; General Instruction No 1 |
|
CSA Z241 SERIES- 03 |
Park Model Trailers-Second Edition; Update No 1 |